SG Browser [Free Internet Browsing for your phone][Smart / Globe users]
Message to all Moderators and Administrators:
Message from the Administrator:
Thank you for giving me your blessings to post my application here, please transfer it under the mobile section.
adeno, on Jul 23 2009, 10:09 PM, said:
I have given the chance to share to all of you the SG Browser, a mobile internet browser, for your phone, that allows you to surf the net using your phone FREE of Charge. Other say, this is bad thing to use for your phone or on your sim, but let me explain to all of you why it is safe to use it. How does it is free of charge? Smart and Globe offers free sites on their system which allows you to surf the net on those free sites without any charge (case to case basis). That's why, Im using those freesite and other tricks so that you can all surf the net free of charge. I can assure you you will not be charged for the internet usage if you just follow my instructions / reminders below.
DISCLAIMER
The www.SarahGeronimo.com website and its staff have no liability for any consequential damages (including, but not limited to, loss of data, security issues, direct or indirect damage to property or privacy) arising from the use of, or inability to properly use, the software application that was developed by one of our members, eduard816.
While we appreciate the proactive ways of our members who want to contribute to the online community, the staff cannot (and will not) vouch for the security issues that might be related to software applications that are not directly developed by the staff and/or their recognized partners. The SG.com staff did not endorse the software, and members who downloaded, installed and used them on their mobile phones did so at their own will.
MY DISCLAIMER:
Read the Entire post first before downloading / trying the said application, you must follow first the DO's and DONT's on these post. I will not be held responsible for any charged on your load due to irresponsible or without understanding the whole thread.
Thank You.
Let's BEGIN...
COMPATIBLE WITH:
- ALL JAVA / J2ME PLATFORMED PHONES-
- Nokia Phones
- SE phones / UIQ phones
- Motorola Phone
- Samsung (not all units)
- LG (May napagana na ako sa LGKS360 phones)
THINGS YOU MUST DO FIRST:
1. You need ACTIVATE YOUR INTERNET FEATURE OF YOUR SIM.
2. You must have atleast 1peso load and below 10pesos load, to be SURE NA HINDI KAYO MABABAWASAN NG LOAD!
Sa Globe ko naman kahit zero balance nakakapagsurf pa ako.
3. You need to configure the settings of your phone, proper settings which include settings up or requesting access point from your network.
THINGS YOU MUST NOT DO:
1. Use the application when you have load exceeding 10pesos.
2. Use the application when you're not sure if youre sim is internet activated.
HOW TO ACTIVATE YOUR INTERNET OF YOUR SIM
GLOBE
For a complete listing of compatible MMS & GPRS phone handsets — send NOKIA, ERICSSON or SAMSUNG (your handset model) to 2365.
To get your phone’s settings, text GO (handset model) to 2951. Example, GO N3650. (For a list of compatible handsets, refer to #1)
Note: For Nokia 6220, 6600, and 6820, text GO < handset model >,1234 and send to 2951. Make sure to type in the two commas before the 1234 PIN. Regular text messaging charges will apply.
Enter 1234 when asked for PIN to save settings.
Send an MMS message for only Php 5.00 to activate the service.
Note: For prepaid subscribers, please make sure you have credits first before trying to access GPRS/MMS.
SMART
OTA (over-the air) configuration
a) To activate GPRS *and* MMS
- SET MMS send to 211
- wait for the configuration to be downloaded to your phone (up to 24 hours)
- once downloaded, you will have SmartMMS data account, and SmartMMS WAP profile, and your MMS is configured already to use SmartMMS WAP profile
- you will also receive a confirmation message that your GPRS and MMS have been activated
- SET INTERNET (handset model) send to 211
- wait for the configuration to be download to your phone, in minutes
- once downloaded, you will have SmartPC data account, and SmartPC WAP Profile
- edit this account to include DNS settings. DNS IP addresses are -202.057.096.003, 202. 057.096.004. you only need one.
c) To configure WAP via GPRS
- SET GPRS T68 send to 211
- wait for the configuration to be download to your phone, in minutes
PHONE SETTINGS
This Phone Settings are the Access Points that the Network had provided you, You just need to use 1 Access point on using the Application, use the SMART Internet / Myglobe Inet Access point , which has no proxy and no port, just the APN (Access Point Name)
Globe = http.globe.com.ph
Smart = internet
S40 USERS (Please check this Settings - Manual Configuration)
GLOBE
1. Go to Personal Config Settings.
2. Choose Option
3. Add New
4. Choose WEB as your application type.
5. Set this settings.
*Account name = any string you want. (kahit po ano)
*Homepage = http://wap.globe.com.ph
*User Name =
*Password =
*Use Pref. Access pt. = NO
*Access point settings
6. Set this settings under Access point settings
*Proxy = Disabled
*Proxy Address = none
*Proxy port = 0
*Data Bearer = Packet Data
*Bearer Settings
7. Set this settings under Bearer Settings
*Packet data access point = http.globe.com.ph
*Network type = IPv4
*Authentification type = normal
*Username =
*Password =
8. Now, Back to your personal Account Menu..
9. Choose again option, then "ACTIVATE" Activate nyo yong ginawa nyo sa taas..
Your almost done! Next step is creating access point settings.
Do this:
1. Go to your Personal Config Settings.
2. Under Personal Accounts Menu, choose OPTION.
3. Add New
4. Choose now "access point"
5. Set this settings under Access Point:
*Account name = any
*Access point Settings
**Data Bearer = Packet data
** Bearer Settings
6. Set this settings under Bearer Settings:
*Packet data acc. pt. = http.globe.com.ph
*Network type = IPv4
*Authentification type = normal
*Username =
*Password =
8. Now, Back to your personal Account Menu.
9. Choose again option, then "ACTIVATE" Activate nyo yong ginawa nyo sa taas.
SMART
1. Go to Personal Config Settings.
2. Choose Option
3. Add New
4. Choose WEB as your application type.
5. Set this settings.
*Account name = any string you want. (kahit po ano)
*Homepage = http://wap.smart.com.ph
*User Name =
*Password =
*Use Pref. Access pt. = NO
*Access point settings
6. Set this settings under Access point settings
*Proxy = Disabled
*Proxy Address = none
*Proxy port = 0
*Data Bearer = Packet Data
*Bearer Settings
7. Set this settings under Bearer Settings
*Packet data access point = internet
*Network type = IPv4
*Authentification type = normal
*Username =
*Password =
8. Now, Back to your personal Account Menu..
9. Choose again option, then "ACTIVATE" Activate nyo yong ginawa nyo sa taas..
Your almost done! Next step is creating access point settings.
Do this:
1. Go to your Personal Config Settings.
2. Under Personal Accounts Menu, choose OPTION.
3. Add New
4. Choose now "access point"
5. Set this settings under Access Point:
*Account name = any
*Access point Settings
**Data Bearer = Packet data
** Bearer Settings
6. Set this settings under Bearer Settings:
*Packet data acc. pt. = internet
*Network type = IPv4
*Authentification type = normal
*Username =
*Password =
8. Now, Back to your personal Account Menu.
9. Choose again option, then "ACTIVATE" Activate nyo yong ginawa nyo sa taas.
-Check also this one, I dont have a s40 phone but try to look for the Access Point Name on your Connection Settings-
Settings - Connections - Packet Data or GPRS - Make sure may laman dun
GLOBE = http.globe.com.ph
SMART = internet
S60 Users (you can manually create this or just check the access point that the network gave you)
S60 include v1, v2, v3 and v5 phones (OS7,OS8,OS9 respectively...)
GLOBE
Connection Name: Myglobe inet (any name will do)
Access Point Name: http.globe.com.ph
Authentication: Normal
Press Options - Advance Settings
Proxy Server Address = none
Port number = 0 (zero)
Then save it!
SMART
Connection Name: Smart Internet (any name will do)
Access Point Name: internet
Authentication: Normal
Press Options - Advance Settings
Proxy Server Address = none
Port number = 0 (zero)
Then save it.
-Check also this settings-
* SETTINGS - CONNECTIONS - PACKET DATA - Then put on the Access Point Name
Globe = http.globe.com.ph
Smart = internet
SG. Browser Application
Make sure you followed the instructions / reminders on the top before downloading the file
DOWNLOAD THE FILE! Check the Link Below!
SCREENSHOTS:
Icon

Splash Screen

Welcome Screen

Main Screen

Yahoo Site...

Friendster

About

NOTE:
IF YOU WILL DOWNLOAD OR TRY THE APPLICATION, POST FIRST A REPLY THAT YOU DOWNLOADED THE APPLICATION AND WANT TO TRY IT. This will help us avoid "leechers" on our site from fetching applications.
If you don't post any reply that you have downloaded the file and you're asking me for technical assistance, Im sorry but I will not be able to help you. I need to see who downloaded the file and want to try it. Make sure to post a reply. Okie?
DOWNLOAD LINKS:
SGBrowser_Globe_eduard816
SGBrowser_Smart_eduard816
THANK YOU!!!! Im done!!!!
Ohhh.. I forgot... I dedicate all my works, modified applications, tutorials to be Girlfriend, Sally
Proud to say, WE ARE AN AVID FAN of MISS SARAH GERONIMO...
eduard816
JAVA Modifier, JAVA Mobile Development Team














